Skip to main content
VRS Black FridaySee all deals →
VRS Logo
VRS Logo
Pro G2 Pedals
€199
€179
VRS® DirectForce® Pro G2

G2 Clutch (Sport)

Pure mechanical precision.

Regular price €199Launch price €179VAT included

Launch price until 4 January 2027. Regular price €199 from 5 January 2027.

Pre-orderEstimated shipping: approx. 4 December

Measure the driver. Not the pedal. A brake that firms up like a race car's, a zero-friction throttle and a clutch that lets go like the real thing, with a load cell on every pedal.

Also in the Elite edition, €219 →

Key features

  • ProgressiveMechanical brake, no hydraulics
  • Zero frictionThrottle on a ball bearing
  • Real clutch feelForce drops at the end of the stroke
  • Load cellOn every pedal, part of the frame
  • Steel springsSame force hot or cold
  • Adjust on the rigPreload, brake curve, face height and tilt
  • CNC-machined facesAluminium, sandblasted, black anodised
  • European UnionMade in
  • 3 yearsLimited warranty
G2 Clutch (Sport)
G2 Clutch (Sport)
G2 Clutch (Sport)
G2 Clutch (Sport)
G2 Clutch (Sport)
G2 Clutch (Sport)
G2 Clutch (Sport)
Complete your G2 pedals
checkbox
G2 Throttle & Brake (Sport)
G2 Throttle & Brake (Sport)
G2 Throttle & Brake (Sport)
Launch price until 4 Jan 2027, then €699
€699
€599
G2 Damper Upgrade Kit
G2 Damper Upgrade Kit
G2 Damper Upgrade Kit
Coming soon
€89
G2 Face Upgrade Kit, Clutch
G2 Face Upgrade Kit, Clutch
G2 Face Upgrade Kit, Clutch
Coming soon
€59
G2 Baseplate
G2 Baseplate
G2 Baseplate
Coming soon
€119
Pre-order

EU orders start shipping approx. 4 December

Estimated date when orders start leaving our warehouse. Delivery time depends on your location.

Subtotal
All prices include VAT (DE)
Shipping is calculated at checkout
Save €20
€199
€179
Pure mechanical precision

Measure the driver. Not the pedal.

G2 brake bell crank and tie rod
Brake

A brake that feels the same on every lap

200 kgload cell that carries the pedal arm

A tie rod and bell crank make the force rise faster the further you press, so the pedal firms up under your foot the way a race car brake does. No oil, no seals, nothing to bleed.

  • Progressive tie rod and bell crank linkage
  • Crank CNC-machined from solid 6061 aluminium
  • Adjustable curve, with measured force graphs
G2 brake springs
Springs

Steel springs: the same force, hot or cold

2 springsin the box, the red one roughly doubles the force

Elastomers push back differently on release than on press, and soften as they warm. A steel spring gives the same force at the same travel, in the first ten minutes and the last.

  • Steel compression springs, no elastomers
  • Blue fitted, red included
G2 throttle spring on its centre shaft
Throttle

A zero-friction throttle

10 kgload cell in the pedal arm

The back of the spring sits in a swing bracket that turns on a ball bearing, so the spring and its shaft pivot with the pedal and the spring is always pressed in a straight line, never bent or binding, even with a lot of preload. No notch at the start of the travel: the pedal moves the instant you touch it and follows when you lift.

  • Ball-bearing swing bracket
  • Polished 304 stainless shaft in a low-friction POM bearing
  • Tool-free preload knob
G2 clutch linkage
Clutch

A clutch that feels like a real car’s

80 kgload cell

The force rises, then falls away at the end of the stroke, as it does with a diaphragm spring. Your foot finds the same reference point for every start and downshift.

  • Geometry modelled on a diaphragm-spring clutch
  • Rear pivot held on both sides, on ball bearings
G2 hydraulic damper
Damper · fitted on Elite

A hydraulic damper for a steadier pedal

Adjustabledamping, held by a locking screw

The damper resists more the faster you press, so trail braking becomes a controlled release. Elite has one on every pedal. On Sport every arm is prepared for the G2 Damper Upgrade Kit.

  • Runs on bearings: adds damping, not friction
  • Fits the throttle, brake or clutch
Engineering details

Rigid build, tool-free adjustment, clean signal

  • G2 load cell

    The load cell is part of the frame

    On every G2 pedal the load cell is a load-bearing part. Fewer parts between foot and sensor means less to flex and nothing to drift out of line.

    Load cells: 200 kg brake · 80 kg clutch · 10 kg throttle

  • G2 preload knob

    Tool-free preload on every pedal

    Spring preload on all three pedals is set by a machined aluminium knob, by hand, with the pedals bolted down.

    CNC aluminium preload knobs, carbon grey anodised

  • G2 pedal face mount

    Pedal faces adjust for height and tilt

    The face sits on a two-screw mount. Slide it along the 27 mm slots to set its height, and set its tilt so it meets your sole flat.

    Two-screw face mount · 27 mm height range · adjustable tilt

  • G2 pedal feet

    3 mm steel plate, built not to flex

    A 3 mm steel frame on thick steel feet holds the pedal still under your hardest stop. Tilt locks into fixed holes, so left and right always match.

    5 fixed tilt positions, about 20° · dual end stops, 70 and 90 Shore

  • G2 Elite machined pedal faces

    CNC-machined aluminium faces on both editions

    Sport faces are 2 mm aluminium with CNC-machined edges, sandblasted and black anodised. Elite faces are machined from solid 6061, carbon grey anodised, fixed from the sides with a diamond grip on the brake and clutch.

    Both curved to R400 · Elite faces available for Sport as G2 Face Upgrade Kits

  • VRS Pedal controller

    A 24-bit controller for a clean signal

    All three load cells are read by a low-noise amplifier and a 24-bit converter. VRS One handles calibration, maximum brake force and dead zones.

    VRS Pedal controller · 24-bit ADC · USB

G2 Pedals Specs, Box Contents & Editions

Brake

  • 200 kg load cell that carries the pedal arm
  • Progressive tie rod and bell crank linkage, no oil or seals
  • One-piece CNC-machined 6061 aluminium crank
  • Steel springs, no elastomers. Blue fitted, red included
  • Tool-free CNC preload knob

Throttle

  • 10 kg load cell, bolted into the arm
  • VRS-engineered throttle spring, custom-manufactured for VRS, on a polished stainless centre rod
  • Ball-bearing swing bracket: the spring and shaft pivot with the pedal, so the spring never binds
  • Polished 304 stainless shaft in a low-friction POM bearing
  • Tool-free CNC preload knob with a wide range

Clutch

  • 80 kg load cell
  • Race car force curve: rises, then drops at the end
  • Clevis linkage with roller
  • Rear spring pivot held on both sides, on ball bearings
  • Tool-free CNC preload knob

All pedals

  • 3 mm laser-cut steel frame, deep black powder coat
  • Shielded ball bearings on the pivots
  • Dual end stops, 70 and 90 Shore, on hex spacers
  • 5 tilt positions, about 20°
  • Pedal face height (27 mm) and tilt adjustment
  • Faces curved to R400. Sport: 2 mm aluminium, CNC-machined edges, sandblasted, black anodised. Elite: CNC-machined from solid 6061, carbon grey anodised, diamond grip on brake and clutch

Electronics and software

  • VRS Pedal controller, all-aluminium, 3 pedal ports
  • 24-bit ADC, 14.3 effective bits
  • USB, 1.6 m cable
  • VRS One: calibration, maximum force, dead zones, firmware updates

Mounting

  • 4 × M6 per pedal, slotted, 70 × 120 mm pattern
  • Same footprint for throttle, brake and clutch
  • 87 mm wide per pedal, 92.5 mm with a damper
  • Optional G2 Baseplate

Compatibility

  • PC with a USB port, Windows 10 or above
  • Any game that supports controllers
  • The clutch uses the Pedal controller from the Throttle & Brake set
DirectForce Pro G2 Pedals

Measure the driver. Not the pedal.

A load cell on every pedal, a progressive mechanical brake, a zero-friction throttle and steel springs that feel the same on lap 100 as on lap 1. Throttle & Brake and Clutch, in Sport and Elite. Made in EU, with a three-year limited warranty.